Safety
Sort results by: Date Added | Alphabetically
- Open comment period runs March 30, 2012 – May 14, 2012. This standard defines minimum performance requirements for occupational health and safety management systems (OHSMS).
- Program encourages teachers to create healthy, sustainable classrooms.
- When examining the factors contributing to slips and falls, we find that they can be divided into three distinct categories: physiological, social/emotional, and environmental.
- Why should we be concerned about indoor air quality in our schools?
- Protecting the safety and health of restorers and building occupants is of paramount importance in water damage restoration projects.
- Find out about The Clean Trust’s ultimate aim in promulgating standards.
- Which is healthier: carpet or hard floors? The answer to that question is more complex and less clear-cut than you might think.
- Proper waste management promotes good indoor air quality (IAQ), decreases the need for pesticides, and controls odors, contaminants, and vermin.
- One of the best ways to capture tracked-in moisture and soil is through the use of floor mats. However, using the right floor mat is important.
- The Clean Trust has announced that the revised ANSI-approved S100 Standard and Reference Guide for Professional Carpet Cleaning is now available.
- When renovating or remodeling, extra precaution should be taken to ensure the safety of students and staff. Here's how to do so before, during, and after renovation.
- Here's the details on how to keep students and staff safe when renovating and remodeling.
- The Carpet and Rug Institute (CRI) and The National Floor Safety Institute (NFSI) are partnering to reduce slips and falls by promoting the installation of NFSI-certified entrance matting, and carpeting wherever possible.
- How to go about a simple school walkthrough inspection and what potential IAQ problems to be on the lookout for.
- Use this checklist from EPA to make your IAQ walkthrough inspection as productive as it can be.
- Occupational exposures to antimicrobial pesticides are known to cause adverse health effects.
- After hypothesizing potential causes, you can perform simple checks to determine if the problem is obvious or if deeper investigation is required.
- Recommended techniques and tools to measure for adequate airflow, lighting, and thermal comfort - relative humidity and temperature.
- Evaluating the symptoms can help narrow down possible causes and can help you determine what checks need to be done.
- Determining where and when problems occur, and by which individuals, can help management determine the source of the indoor air quality problem.
- General process to troubleshooting indoor air quality problems in commercial facilities.
- How Integrated Pest Management (IPM) can be used to reduce student and staff exposure to harmful pesticides.
- The Clean Trust has announced the development of a certification exam for professionals in the mold remediation industry.
- The Cleaning Industry Research Institute International (CIRI) is pleased to announce that Dr. Eugene Cole will be the keynote speaker for its Fall 2011 Cleaning Science Symposium, “Cleaning and Disinfection: The Science, Practice and Controversy.”
- There is no denying it: There is a link between the physical condition of workers and their performance in the work place.
- The Healthy Facilities Institute (HFI) is pleased to officially support the Cleaning Industry Research Institute International (CIRI) Symposium, “Cleaning & Disinfection: The Science, Practice & Controversy”.
- The drinking water in thousands of schools contains lead and other toxins, prompting experts to urge administrators to look into treatment systems to protect students.
- Antimicrobial coatings are designed to help prevent future growth of mold on previously contaminated surfaces that have been properly cleaned.
- 'Glowing hands' in the waiting room improves kids' handwashing.
- Searchable databases on chemical toxicity and exposure data are now available for scientists and the public.
- Types of mold and the health effects and symptoms associated with exposure to them.
- When signs of mold growth are present, open communication with building occupants is essential.
- There are five general principles of cleaning up - or remediating - mold.
- EPA's guide to evaluating moisture and mold problems and properly handling water damage and mold growth to ensure full remediation.
- The common causes of mold growth and ways to prevent it.
- OSHA guide to preventing mold, mold sources, and building-related illnesses.
- Healthcare acquired pathogens can be prevented by optimizing high touch surface cleaning and by implementing programs that include monitoring and education.
- Carpeting can help hospitals improve sound-absorption, indoor air quality, staff and patient safety, and aesthetics, but it also poses many challenges.
- There is a growing recognition that facility management contributes to the health and well being of building occupants, thereby benefiting efficiency, productivity and profitability — key pillars of an organization’s bottom line.
- While there are services to protect adults from some environmental hazards at school, more vulnerable children lack the same protection.
- ICM is defined as an open-source protocol in which best practices are evaluated by scientific measurement of cleaning outcomes.
- Cleaning, by its very nature and definition, is, or should be, green.
- Even with the resurgence of bed bug infestations, the public health community has yet to mount a coordinated response to the problem. The results of surveys conducted at four events reveal public health agencies need to take action.
- While most are aware of the prevalence of bed bugs, more research must be done in regards to their behavior, effect on humans, and rampant spread; and action must be taken.
- Without a long-term commitment to comprehensive environmental management, not even the best high performance school can hope to stay high performing for very long.
- Process Cleaning for Healthy Schools™ (PCHS™) optimizes efficiency, cleanliness, ease-of-deployment, and health factors through a carefully designed and documented system tailored for K-12 school districts.
- Pathogenic microorganisms are transmitted in many ways in hospitals. One important consideration is the role that the environment plays in pathogen transmission, specifically leading to airborne and waterborne infections.
- Polycyclic aromatic hydrocarbons (PAHs) are a group of over 100 different chemicals that are formed during the incomplete burning of coal, oil and gas, garbage, or other organic substances like tobacco or charbroiled meat.
- 2003 study published in Environmental Health Perspectives (EHP) found 1.8% of population loses job as result.
- Getting commercial cleaning product manufacturers to come clean and disclose their products' ingredients is important.
- A clean facility is a healthy facility - most of the time - but it’s ironic that some products designed to make our buildings cleaner and healthier may contribute to asthma.
- The Vessel Sanitation Program (VSP) at the Centers for Disease Control and Prevention (CDC) assists the cruise ship industry to prevent and control the introduction, transmission, and spread of gastrointestinal (GI) illnesses on cruise ships.
- Since a floor that is slip-resistant when wet will generally be slip resistant when dry, taking measurements of the condition of floors by benchmarking the wet Coefficient of Friction (COF) is an important starting point to raise safety levels.